Heavy equipment parts can differ when it comes to your needs. Some heavy equipment parts might look similar, but some are better than others for different needs. Here's the information you need on the types of parts for different needs and how to make sure you get the right part.
Understanding the Equipment Parts You Need
Heavy equipment parts are used in heavy machinery, including construction equipment, military vehicles, and other machines. When it comes to heavy equipment parts, you'll know the exact parts you need when you understand the type of vehicle they go in.
Heavy equipment parts can be broken down into three main categories: engine parts (engines, transmissions, and similar major components), undercarriage parts (drive trains, axles, and similar major components), and body parts (frames, rims, lifting arms, attachments, and similar major components).
Lifting Hooks
Heavy equipment lifting hooks are used to lift the load. They are called lifting hooks because they use a cable that attaches to the hook to lift objects. A hand winch or motorized system controls this cable. These heavy equipment lifting hooks can be used in many different settings. For example, large steel beams are lifted by cranes and hoisted into place using these heavy equipment parts.
Lifting Hooks parts are available in many sizes for all kinds of applications. Hooks are available in various widths. Some have an upward curve while others are straight, depending on the job at hand.
Another type of lifting equipment is the lift sling, which uses fabric or chain straps instead of a cable. The hook is shaped to fit around the object being lifted, and then the strap is pulled up and attached to an overhead crane causing the object to rise into the air and move into position. A variety of lifting straps, chains, cables, and clamps can be obtained to complete your project.
Straightening Bars
Heavy equipment straightening bars parts are designed to straighten benders and other heavy equipment. These parts are used in the field to repair heavy equipment so that it can be used again. Heavy equipment straightening bar parts can be used on a variety of heavy equipment, including cranes, bulldozers, trucks, buses, and other vehicles.
Heavy equipment straightening bars parts reduce the number of times that a piece of heavy machinery needs to be repaired because it can be used to make quick repairs on the spot. With straightening bars, you don't need to spend hours or days waiting for a piece of heavy machinery to get repaired and then shipped back to you.
PTOs and Hitches
A PTO, or power take-off, is a device that transfers power from the engine to another machine, such as a pump, saw, conveyor belt, or other heavy equipment. It's one of the most common items on large machinery. PTOs can be simple or complex. They may be built into the machine or added as an aftermarket component.
Hitches are used to connect one piece of equipment to another. They can also be found on tractors and other vehicles used for hauling purposes. Some hitches require special adapters and need to be mounted at certain angles to use them correctly. Often, heavy equipment with PTO drives uses a three-point hitch that is specifically designed for the machines that it is used to operate.
Heavy equipment parts matter, so if you're thinking about buying new replacements or trying to stay ahead of breakdowns, contact a heavy equipment parts dealer to find exactly what you need.